Cabletron Systems 5000, 5500 Manual page 50

Table 3-4. Possible Port Types (Continued)
mlt3
sddi
smf
E10BaseT
E10BaseF
E100BaseTX
scf
Status
Displays the current operational state of this port. Possible states are Other,
Ok, MinorFault, and MajorFault.
Additional Status
Displays an integer representing additional information on the status of this
port.
Table 3-5. Additional Status DeÞnitions
Status Value
0
1
2
3
4
5
6
7
9032208 E4
MLT-3 UTP FDDI
STP FDDI
Single Mode Þber FDDI
UTP Ethernet
Fiber Ethernet
Fast UTP Ethernet
Small-connector Þber FDDI
Table 3-5 provides deÞnitions of the additional status values.
Additional
Initial Value, or no activity was detected on the port in the last
polling period.
At least one packet was transmitted by the port in the last polling
period. No packets were received and no collisions were detected.
At least one packet was received by the port in the last polling
period. No packets were transmitted and no collisions were
detected.
At least one packet was transmitted, and at least one packet was
received in the last polling period. No collisions were detected.
At least one collision was detected on the port in the last polling
period. No packets were transmitted and no packets were
received.
At least one packet was transmitted, and at least one collision
was detected in the last polling period. No packets were received.
At least one packet was received, and at least one collision was
detected in the last polling period. No packets were transmitted.
At least one packet was transmitted, at least one packet was
received, and at least one collision was detected in the last polling
period.
Catalyst Stack System ConÞguration View
Catalyst Stack Ports Table
DeÞnition
ConÞguration Views
3-11