To Append An Alpha-Numeric "Tag" To A Memory - Yaesu FTM-6000R Operating Manual

To Append an Alpha-numeric "Tag" to a Memory

Memory name tags, such as a call sign may be assigned to the memory channels and
home channels. Input a memory tag using up to 6 characters.
Alphabetic characters, Numbers and Symbols may be entered to the memory name tag.
1. Recall the memory channel or HOME channel to as-
sign the name.
2. Press and hold the [V/M mw] key.
3. Rotate the DIAL knob to select "NAME", and then
press the DIAL knob.
4. Rotate the DIAL knob to select the first character in
the name to store.
5. Press the DIAL knob momentarily to move on to the
next character. Letters, numbers, and symbols are
available for storage.
6. Again, rotate the DIAL knob to select the desired
letter, number, or symbol, then press the DIAL knob
momentarily to move on to the next character spacs.
7. Repeat the above step to program the remaining
letters, numbers, or symbols of the desired label. A
total of six characters may be used in the creation of
a label.
The cursor position for character input moves to the left when the [BAND grp] key is
pressed, and it moves to the right when the [PMG pw] key.
8. When you have completed the creation of the label, press and hold the [V/M mw]
key to save the label and exit to memory channel screen.
9. Each time the DIAL knob is pressed and hold, the name tag display and the frequen-
cy display will switch.
22
← →