Copying
3
Navigate to:
Copy to > select the tray that contains transparencies > Copy It
If there are no trays that support transparencies, then navigate to:
Manual Feeder > select the size of the transparencies > Transparency
4
Load transparencies into the multipurpose feeder, and then touch Copy It.
Copying on letterhead
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
From the home screen, navigate to:
Copy > Copy from > select the size of the original document
3
Touch Copy to > Manual Feeder.
4
Place the letterhead faceup, top edge first into the multipurpose feeder.
5
Select the size of the letterhead, and then touch Letterhead > Copy It.
Creating a copy shortcut using the printer control panel
1
From the home screen, touch Copy.
2
Adjust the copy settings, and then touch Save As Shortcut.
Note: If you change the settings after the copy shortcut has been created, then the settings are not
saved.
3
Type a unique name for the shortcut, and then touch
4
Verify that the shortcut name is correct, and then touch OK.
If the shortcut name is incorrect, then touch Cancel, and then reenter the information.
Notes:
•
The shortcut name appears in the Copy Shortcuts icon on the printer home screen.
•
You can use the shortcut when copying another document using the same settings.
Customizing copy settings
Copying to a different size
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
.
72