Scanning; Using Scan To Network; Scanning To An Ftp Address - Lexmark CX417 Series User Manual

Scanning

Scanning

Using Scan to Network

Scan to Network lets you scan your documents to network destinations specified by your system support
person. After the destinations (shared network folders) have been established on the network, the setup
process for the application involves installing and configuring the application on the appropriate printer using
its Embedded Web Server. For more information, see

Scanning to an FTP address

Automatic document feeder (ADF)
Use the ADF for multiple‑page documents including
two-sided pages.
The scanner lets you scan documents directly to a File Transfer Protocol (FTP) server. Only one FTP address
may be sent to the server at a time.
When an FTP destination has been configured by your system support person, the name of the destination
becomes available as a shortcut number, or it is listed as a profile under the Held Jobs icon. An FTP destination
could also be another PostScript printer.
Creating shortcuts
Instead of entering the entire FTP site address on the printer control panel each time you want to send a
document to an FTP server, you can create a permanent FTP destination and assign a shortcut number. There
are two methods for creating shortcut numbers: using the Embedded Web Server or using the printer control
panel.
Creating an FTP shortcut using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
"Setting up Scan to Network" on page
Scanner glass
Use the scanner glass for single-page documents, book
pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as magazine
clippings).
113
23.