Table of Contents
Advertisement
of media or ribbon you use, the amount of energy to the printhead, the print speed,
and the ambient temperature of the room you print in. The firmware detects the
new printhead when you restart the printer.
1.
2.
3.
4.
5.
6.
56
Turn the printer off and disconnect the printer from power.
Open the media cover.
Remove the media and ribbon (if installed).
Turn the printhead lift lever counterclockwise to raise the printhead.
Pull down the Front Sensor.
Move the inside toggle and outside toggle to the center of printhead.
PD45 User Guide
Advertisement
Table of Contents
