System Network Services - Honeywell PD45 User Manual

System Network Services

Note: You will only see Manage Services from the menus if you have an Ethernet or
Wireless module installed in the printer.
Note: The printer supports 10/100 Mbps Ethernet (10BASE-T, 100BASE-T)
To view these services:
•
•
System
Network
Service Setting
Web Server
FTP
SFTP
Net1
SNMP
LPR
IKEv2
SSH
Telnet
XML
Time Server
Device
Management
Connectivity
Agent
76
From the printer Main Menu, select Settings > System Settings > Manage
Services.
From the printer web page, go to Configure > System Settings > Manage
Services.
Description
Determines if the web server is enabled in the printer.
Determines if the printer can use File Transfer Protocol.
Determines if the printer can use Secure File Transfer Protocol
Determines if the printer can use Telnet to communicate with
Fingerprint.
Determines if the printer can use SNMP.
Determines if the printer can use the line printer server (LPR)
daemon.
Determines if the printer can use IKEv2.
Determines if the printer can use Secure Socket Handling (SSH).
Determines if the printer can use Telnet.
Determines if the printer can use XML printing.
Determines if the printer uses the Network Time Protocol (NTP) to
synchronize its time with a network time server. The default Server
Address is ntp0.cornell.edu, and the default Port Number is 123.
Determines if the printer can use 9300 TCP/IP port to
communicate with HCD.
Determines if the printer can communicate with Honeywell Cloud
on port 10000.
Default
Enable
Disable
Enable
Enable
Enable
Enable
Disable
Disable
Disable
Enable
Disable
Enable
Disable
PD45 User Guide