Page 1
L-GZ916PST-D TIERNEY GAZEBO Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase. Our clear, easy o follow, step by step instructions will guide you through the project from start to finish.
Table of Contents Table of Contents ............2 Pre-Assembly ..............3 Safety Information ............2 Planning assembly ..............3 Warranty ................. 2 Hardware Included ..............3 What is Covered ...............2 Package Contents ..............4-5 What is Not Covered ..............2 ...
Pre-Assembly PLANNING ASSEMBLY Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact customer service for replacement parts.
Page 5
Pre-Assembly (continued) Part Description Quantity P11109A01106 Post P11019A01106 Long screen P11020A01106 Short screen P10803A01106 Connector of middle bottom beam P10208A01106 Cant beam P10409A01106 Middle beam P10207A01106 Cant beam bottom tube P10410A01106 Middle beam bottom tube Connector for the large top P10113A01106 Cant beam of small top P10206A01106...
Assembly NOTE: To avoid destroying the finish, do not put the NOTE: To avoid destroying the finish, do not put the parts on the ground directly. parts on the ground directly. Insert the long screen end (B1) into the short screen (B2), fasten ...
Page 7
Assembly (continued) NOTE: To avoid destroying the finish, do not put the NOTE: To avoid destroying the finish, do not put the parts on the ground directly. parts on the ground directly. Insert cant beam end (E) into Cant beam bottom tube (G), then insert Attached the cant support (P) to the long and short screen the cant beam other end (E) into big top connector (J), attached the (B1/B2), by using bolt (CC) and washer (BB).
Page 8
Assembly (continued) NOTE: To avoid destroying the finish, do not put the NOTE: To avoid destroying the finish, do not put the parts on the ground directly. parts on the ground directly. Fix the small canopy (R) to the small top cant beam ...
Care and Cleaning □ Before using, clean the gazebo completely with a soft dry towel. □ Do not put your gazebo in wet conditions where there is a risk of rust developing. □ When not in use, store in a cool, dry area. □...
Need help?
Do you have a question about the L-GZ916PST-D and is the answer not in the manual?
Questions and answers