Mono-Ped Control System (Option) - Doosan D40S-5 Operation & Maintenance Manual

Operation Section
Steering Knob (If Equipped)
There is a steering knob available for inclusion with
new truck deliveries. This option is solely intended
for slow travel situations when two handed steering
is not possible due to hydraulic operations.
WARNING
Loss of stability can occur when a lift truck
steering wheel is rotated quickly while the truck
is in motion. A steering knob will assist with
easy rotation of the steering wheel, but if a
steering knob is improperly used (e.g., rotating
the steering wheel quickly while the truck is in
motion), this can contribute to truck instability
and a tip over. A steering knob is intended for
slow travel maneuverability ONLY.
https://www.forkliftpdfmanuals.com/
Mono-Ped Control System
(Option)
Forward-Push the left side (2) of the pedal
for FORWARD direction travel.
Neutral-The lift truck should not move when
the Mono-Ped pedal is released..
Reverse-Push the right side (1) of the pedal
for REVERSE direction travel.
The MONO-PED pedal controls the speed and
direction of the lift truck. Pushing on the right side of
the pedal (1) causes the lift truck to move in
REVERSE. The optional reverse lights and optional
back-up alarm will be ON in the REVERSE position.
Pushing on the left side of the pedal (2) causes the
lift truck to move in FORWARD.
The speed of the truck increases as the pedal is
depressed
-110-