Mercedes-Benz E-Class Coupe 2022 Operator's Manual page 58

56 56 Occupant safety
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight group II or III.
Contact with the roof when the head
restraint is fully extended and locked in place
will not result in any restrictions on use.
O The child restraint system must not be put
under strain between the roof and the seat
cushion and/or be installed facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
1 LATCH-type (ISOFIX) mounting bracket
Before every journey, make sure that the LATCH-
type (ISOFIX) child restraint system is engaged
correctly in both mounting brackets in the vehicle.
Remove and stow away covers 1.
#
Attach the LATCH-type (ISOFIX) child restraint
#
system to both mounting brackets in the vehi-
cle.
A er removing the child seat, reattach covers
#
1.
F F ast astening a T ening a Top Tet op Tether her
& W W ARNING
ARNING Risk of injury or death if the
rear seat backrests are not locked a er
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests a er
#
installing Top Tether belts.
Observe the lock veri cation indicator.
#
If the le and right seat backrests are not
engaged and locked in place, this will be shown
on the display on the instrument cluster.