Mercedes-Benz E-Class Coupe 2022 Operator's Manual page 331

Pr Prepar eparing t ing the v he vehicle f ehicle for a wheel c or a wheel change hange
R R eq equir uirements: ements:
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
R
ground.
The required tire-change tool kit is available.
R
%
If your vehicle is not equipped with the tire-
change tool kit, consult a quali ed specialist
workshop to nd out about suitable tools.
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
#
position.
Shi the transmission to position j.
#
V V ehicles wit ehicles with lev h level contr el control syst ol system: em: Set the
#
normal vehicle level ( page 202).
/
Switch o the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
#
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
If necessary, remove the wheel trim/hub caps
#
( page 329).
/
Raise the vehicle ( page 330).
/
#
R R emo emoving and inst ving and installing t alling the wheel tr he wheel trim/hub caps
R R eq equir uirements: ements:
The vehicle is prepared for a wheel change
R
( page 329).
/
Plastic hub cap Plas tic hub cap
T T o r o remov emove: e: turn the center cover of the hub
#
cap counter-clockwise and remove the hub
cap.
T T o inst o install: all: make sure that the center cover of
#
the hub cap is turned counter-clockwise.
Position the hub cap and turn the center cover
#
clockwise until the hub cap engages physically
and audibly.
Aluminum hub cap Aluminum hub cap
im/hub caps
T T o r o remov emove: e: position socket
#
change tool kit on hub cap 1.
Position wheel wrench
#
Using wheel wrench 3, turn hub cap
#
counter-clockwise and remove it.
T T o inst o install: all: follow the instructions above in
#
reverse order.
% Speci ed tight Speci ed tightening t ening torq
Wheels and tires 329 329
2 from the tire-
3 on socket 2.
1
orque: ue: 18 lb- (25 Nm).