Mercedes-Benz E-Class Coupe 2022 Operator's Manual page 119

Switching on high beam Switc hing on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch beyond the point
#
of resistance in the direction of arrow 1.
When the high beam is activated, the L
indicator lamp for low beam will be deactiva-
ted and replaced by the K indicator lamp
for high beam.
Switching Switc hing o o high beam high beam
Move the combination switch back to its start-
#
ing position.
High-beam High-beam asher asher
Pull the combination switch in the direction of
#
arrow 3.
T T ur urn signal light n signal light
T T o indicat o indicate e br brie y: ie y: push the combination
#
switch brie y to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will ash
three times.
T T o indicat o indicate continuously e continuously: : push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
Light and visibility 117
A A ctiv ctivating/deactiv ating/deactivating t ating the hazar he hazard w d war arning lights
Press button 1.
#
The hazard warning lights will switch on automati-
cally if:
The airbag has been deployed.
R
117
ning lights