344
344 Technical data
Do not alter the engine oil or oil lter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed a er the
#
prescribed intervals.
Mercedes-Benz recommends having the oil
changed at a quali ed specialist workshop.
Only use engine oils approved for your vehicle by
Mercedes-Benz.
Quality and capacity of engine oil
Quality and capacity of engine oil
Engine oil
Engine oil speci cations
speci cations
Gasoline engines
Gasoline engines
MB-Freig
MB-Fr
eigabe or MB-
Approval al
Approv
All models
229.51, 229.52,
229.61, 229.71
229.72*
* Recommended for lowest possible fuel con-
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes).
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil speci ca-
tions marked in the table for the lowest SAE vis-
cosity class. Possible restrictions of the approved
SAE viscosity classes must be observed.
The following values refer to an oil change, includ-
ing the oil lter.
Engine oil lling
Engine oil
lling capacity
capacity
Model
Model
E 450
E 450 4MATIC
abe or MB-
N N o o t t es on br
es on brak ake e uid
uid
Observe the notes on operating uids
(
page 340).
/
& W W ARNING
ARNING Risk of an accident due to
vapor pockets forming in the brake system
The brake uid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake uid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking e ect to be impaired.
Have the brake uid renewed at the
#
speci ed intervals.
Capacity
Capacity
Have the brake uid regularly replaced at a quali-
10.0 US qt (9.5 liters)
ed specialist workshop.
Only use a brake uid approved by Mercedes-
9.0 US qt (8.5 liters)
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant
Coolant
N N o o t t es on coolant
es on coolant
Observe the notes on operating uids
(
page 340).
/