Getting Help - Cabletron Systems 9000 Installation Manual

Installing the 9Cx14 Chassis
The Cell Transfer Matrix (installed in the 9C714 chassis only)
The Cell Transfer Matrix provides a Time Division Multiplexed (TDM) based
mesh of full duplex, high speed (1.6 Gbps) dedicated interconnections capable of
carrying standard ATM cell traffic. These interconnections are a series of point-to-
point links between an individual module, and every other module that directly
connects to the Cell Transfer Matrix. If the 9C714 chassis has 14 modules that
connect to the CTM installed, there are 182 point-to-point links between all the
modules, providing a total aggregrate switching capacity of 75 Gbps.

Getting Help

For additional support related to this device or document, contact Cabletron
Systems using one of the following methods:
World Wide Web
Phone
Internet mail
FTP
Login
Password
To send comments or suggestions concerning this document, contact the
Cabletron Systems Technical Writing Department via the following
email address: TechWriting@cabletron.com
Make sure to include the document Part Number in the email message.
Before calling Cabletron Systems, have the following information ready:
• Your Cabletron Systems service contract number
• A description of the failure
• A description of any action(s) already taken to resolve the problem (e.g.,
changing mode switches, rebooting the unit, etc.)
• The serial and revision numbers of all involved Cabletron Systems products in
the network
• A description of your network environment (layout, cable type, etc.)
• Network load and frame size at the time of trouble (if known)
• The device history (i.e., have you returned the device before, is this a recurring
problem, etc.)
• Any previous Return Material Authorization (RMA) numbers
1-4
http://www.cabletron.com/
(603) 332-9400
support@cabletron.com
ftp://ftp.cabletron.com/
anonymous
your email address