Midea M2OC-18HFN1-M Service Manual page 126

grounding wires of PCB.
8)
How to remove the compressor.
4 Compressor
1) Perform work of item 1,2,3
2) Remove
3) Extract refrigerant gas.
4) Remove
5) Remove terminal cover of
6) Remove the discharge pipe
7) Remove the hex nuts and
8) Lift the compressor.
Remove the PCB board.
the electrical
control box and partition
plate.
the sound
insulation material
crankcase heating cable.
compressor, and disconnect
wires of compressor thermo
and compressor from the
terminal.
and suction pipe with a
burner.
washers fixing
compressor to bottom plate.
CN1
⑥
and
the
CN2
⑧
⑦