Midea M2OC-18HFN1-M Service Manual page 104

8)
wire
removing the big handle and the
right-rear panel.
9)
How to remove the compressor.
4 Compressor
1) Perform work of item 1,2,3.
2) Remove the electrical
3) Extract refrigerant gas.
4) Remove the sound
5) Remove terminal cover of
6) Remove the discharge pipe
7) Remove the hex nuts and
8) Lift the compressor.
Disconnect the grounding
(yellow-green)
Remove the PCB board.
control box and partition
plate.
insulation material and
crankcase heating cable.
compressor, and disconnect
wires of compressor thermo
and compressor from the
terminal.
and suction pipe with a
burner.
washers fixing the
compressor to bottom plate.
after
⑧
⑥
⑦