Midea M2OC-18HFN1-M Service Manual page 111

8) Lift the compressor.
5 Reactor How to remove the reactor
1) Perform work of item 1,2
2) Unfasten
3) Remove
4) Disconnect two pieces of
5) Remove
6 The 4-way How to remove the 4-way valve
valve
1) Perform work of item 1,2.
2) Extract refrigerant gas.
3) Remove the electrical parts
4) Remove fixing screw of the
5) Detach the welded parts of
washers fixing
compressor to bottom plate.
the connector
between IPM and reactor.
two screws
cover of inductance, and
remove the cover
inductance
wires connected from the
cover of inductance.
two screws
reactor, and remove the
reactor.
from item 3.
coil, and remove the coil.
4-way valve and pipe.
the
of
of
of
⑦
Screws of
cover of
inductance
Screws of
reactor
Coil
Welded parts