Midea M2OC-18HFN1-M Service Manual page 119

5 Reactor How to remove the reactor
1) Perform work of item 1,2
2) Unfasten the connector
3) Remove
4) Disconnect two pieces of
5) Remove
6 The 4-way How to remove the 4-way valve
valve
1) Perform work of item 1,2.
2) Extract refrigerant gas.
3) Remove the electrical parts
4) Remove fixing screw of the
5) Detach the welded parts of
between IPM and reactor.
four screws
cover of inductance, and
remove the cover
inductance
wires connected from the
cover of inductance.
two screws
reactor, and remove the
reactor.
from item 3.
coil, and remove the coil.
4-way valve and pipe.
Screws of cover of
inductance
of
of
of
Screws of reactor
Coil
Welded parts