Table of Contents
Advertisement
Quick Links
Installation Guide
For Models:
BR56TBC3M
BR56WW3M
net weight of fan: 13.44 lb (6.1 kg)
READ THESE INSTRUCTIONS AND
AND SAVE THEM FOR FUTURE USE
Table of Contents:
Safety Tips. pg. 2
Unpacking Your Fan. pg. 3
Parts Inventory. pg. 3
Installation Preparation. pg. 4
Hanging Bracket Installation. pg. 4
Fan Assembly. pg. 5
Wiring. pg. 6
Canopy Assembly. pg. 7
Blade Assembly. pg. 7
Wall Control Operation. pg. 7
Testing Your Fan. pg. 8
Troubleshooting. pg. 8
Parts Replacement. pg. 8
Warranty. pg. 8
page 1
Model # BR56TBC3M
Model # BR56WW3M
PRINTED IN CHINA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Litex BR56TBC3M
Summary of Contents for Litex BR56TBC3M
- Page 1 READ THESE INSTRUCTIONS AND AND SAVE THEM FOR FUTURE USE Model # BR56TBC3M Installation Guide For Models: BR56TBC3M BR56WW3M Model # BR56WW3M Table of Contents: Safety Tips. pg. 2 Unpacking Your Fan. pg. 3 Parts Inventory. pg. 3 Installation Preparation. pg. 4 Hanging Bracket Installation.
- Page 2 SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS.
- Page 3 Check against parts inventory that all parts have been included. 2. Parts Inventory. a. j-hook hanging bracket. 1 piece b. blade. 3 pieces (Model # BR56TBC3M blade) c. motor housing, downrod and canopy (pre-assembled). 1 piece d. wall control. 1 piece (Model # BR56WW3M blade) e.
- Page 4 3. Installation Preparation. blade edge To prevent personal injury and damage, ensure that the hanging location allows the blades a inches clearance of 10ft. (3.05m) from the floor and 30in. feet (76cm) (76cm) from any wall or obstruction. (3.05m) This fan is suitable for room sizes up to 400 square feet (37.2 square meters).
- Page 5 5. Fan Assembly. Loosen canopy set screw and lower canopy to expose hanging bar. Separate electrical wiring and safety cable from rubber band. Lift fan onto j-hook hanging bracket and slide rubber bushing over j-hook hook. Make the wiring connections as hanging bracket shown in Section 6 on the following page.
- Page 6 wall control wire 6. Wiring. wood joist from ceiling safety cable CAUTION: Be sure outlet box is properly black grounded and that a ground wire (GREEN or white wood screw Bare) is present. and washer Make sure all electrical connections comply with Local Codes or Ordinances and the National Electrical Code.
- Page 7 8. Canopy Assembly. Lift canopy until it covers hanging bracket and touches ceiling. Tighten canopy set screw to secure canopy. canopy canopy set screw 9. Blade Assembly. WARNING: To reduce the risk of serious bodily injury, DO NOT use power tools to assemble the blades.
- Page 8 Service at 1-800-527-1292 to arrange for return of fan. Return fan, shipping prepaid, to Litex Industries, Ltd. We will If fan does not function, please refer to repair or ship you a replacement fan, and we will pay the "Troubleshooting"...
Need help?
Do you have a question about the BR56TBC3M and is the answer not in the manual?
Questions and answers