Operation Via The Browser; Live Page; Connection; Ptz - Bosch AUTODOME IP 4000i NDP‑4502‑Z12 User Manual

10 en | Operation via the browser
3

Operation via the browser

3.1

Live page

3.1.1

Connection

Stream 1
Select this option to display stream 1 of the camera.
Stream 2
Select this option to display stream 2 of the camera.
M-JPEG
Select this option to display the M-JPEG stream of the camera.
3.1.2

PTZ

Pan and tilt controls
–
–
–
–
–
Zoom
Click the + button to zoom in.
Click the - button to zoom out.
Iris
Click
Click
Focus
Click
Click
3.1.3

Pre-positions

The camera displays Pre-position 1 through Pre-position 6. Select the appropriate pre-
position to view the video image for that pre-position/scene. In the lower left of the video
image, the OSD displays the Camera number (title), the Pre-position number, and the Pre-
position number stored.
Below the list of pre-positions/scenes is a drop-down list showing the stored pre-positions/
scenes.
Select the appropriate pre-position (1 through 6). Click
Note: If the pre-position is already stored, a dialog box displays the message, "Overwrite
current pre-position?" Click OK to overwrite, or click Cancel to cancel the operation.
Click
2020-06 | 2.0 |
To tilt the camera up: Click and hold the up arrow.
To tilt the camera down: Click and hold the down arrow.
To pan the camera left: Click and hold the left arrow.
To pan the camera right: Click and hold the right arrow.
To pan and tilt the camera at the same time (variable pan/tilt): Click and drag the center
area (that resembles a point stick or a trackball on a computer keyboard) around the PTZ
control in the direction that you want to move the camera.
(Iris close) to close the iris.
(Iris open) to open the iris.
to focus near.
to focus far.
to display the selected pre-position in the video image.
User Manual
AUTODOME IP 4000i
to store the pre-position.
Bosch Security Systems