Table of Contents
Advertisement
FLEXIDOME IP micro 3000i - outdoor | FLEXIDOME
IP turret 3000i IR - outdoor
3
Operation via the browser
3.1
Live page
After the connection is established, the Live page is initially displayed. It shows the live video
image on the right of the browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video image. The items shown depend
on the settings on the 'Live' functions page.
Connection
In the Connection group, you can configure the Stream option.
Image selection
To view a live stream:
1.
2.
3.
ROI
If Stream 2 is set to SD ROI, the ROI and Pre-positions groups become available.
–
–
–
–
–
–
The ROI and Pre-positions groups are now enabled.
To use the ROI functionality, follow these steps:
–
–
–
Pre-Positions
Six pre-position files can be defined for views generated by the region of interest (ROI)
controls.
1.
2.
3.
4.
Digital I/O
Depending on the configuration of the unit, the alarm input and the output are displayed next
to the image. Expand the Digital I/O group if necessary.
The alarm symbol is for information and indicates the status of an alarm input:
–
The alarm output allows the operation of an external device (for example, a light or a door
opener).
–
Bosch Security Systems B.V.
On the left side of the browser, expand the Connection group if necessary.
Click the Stream drop-down arrow to see the options.
Select the stream you wish to view.
Navigate to Configuration -> Camera -> Encoder Streams
Set Stream 2 to SD ROI
Click Set to save the settings
Go back to the Live page
In the Connection group, click the Stream drop down arrow to see the options
Select Stream 2
On the left side of the browser, expand the ROI group if necessary.
Use the controls to move around the image.
Click + to zoom and - to zoom out.
On the left side of the browser, expand the Pre-positions group if necessary.
Use the ROI controls to define a particular view.
To store this view, click the
–
If a pre-position is already stored, a dialog box displays a message. Click OK to
overwrite or Cancel to cancel the operation
To recall a stored pre-position, click a pre-position button.
The symbol lights when the input alarm is active.
To activate the output, click the checkmark symbol.
–
The symbol lights when the output is activated.
icon of one of the six pre-position buttons.
User manual
Operation via the browser | en
2020-12 | V01 | F.01U.385.759
9
Advertisement
Table of Contents
