Illuminator; Audio - Bosch AUTODOME IP 4000i NDP‑4502‑Z12 User Manual

44 en | Camera
6.18

Illuminator

Note: This menu page is valid for AUTODOME IP 5000i IR and AUTODOME IP starlight 5000i IR
only.
IR mode
By default, the camera is set to automatic illuminator mode (Auto). To deactivate this mode,
select Off.
IR near intensity limit
Select the limit (percentage) of intensity for IR at near focus range. Values range from 0 to 100
(default).
IR far intensity limit
Select the limit (percentage) of intensity for IR at far focus range. Values range from 0 to 100
(default).
For both intensity limit parameters, use a lower number to lower the percentage of intensity if
the scene is overexposed with IR illumination.
IR Operation Range
Select the zoom factor or range for the IR light:
–
–
–
–
Spotlight mode
Select On to set the camera in spotlight mode, which increases the IR intensity values at the
zoom at which the camera is set. Use this mode to see objects at far distances when the
camera is zoomed to a wide angle. Note that an IR beam will be visible in the field of view.
By default, this option is Off.
6.19

Audio

Audio
You can set the gain of the audio signals to suit your specific requirements. The live video
image is shown in the window to help you check the audio source. Your changes are effective
immediately.
If you connect via Web browser, you must activate the audio transmission on the 'Live'
functions page. For other connections, the transmission depends on the audio settings of the
respective system.
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data is encoded according to the selected format and requires
additional bandwidth. If you do not want any audio data to be transmitted, select Off.
Input volume
Set the input volume using the slide. Values range from 0 to 119.
Line Out
Set the line output gain using the slider. Values range from 0 to 115.
Recording format
Select a format for audio recording. The default value is AAC 48 kbps. You can select AAC 80
kbps, G.711 or L16 depending on the required audio quality or sampling rate.
AAC audio technology is licensed by Fraunhofer IIS.
(http://www.iis.fraunhofer.de/amm/)
2020-06 | 2.0 |
1X-30X (default)
10X-30X
15X-30X
20X-30X
User Manual
AUTODOME IP 4000i
Bosch Security Systems