Stepper/Servo Motor Control Interface Connection - Digital Dream EC500 User Manual

5.2 Stepper/Servo Motor Control Interface Connection

Digital Dream Mach3 Motion Controller
The device can be used to control machine tools with stepper
or servo motor controls with pulse and direction interfaces
upto 6-axes.
Picture 5-5 EC500 Stepper/Servo Mark and description
Page -7
Motor Driver Connection(5V)
PIN Mark
XP+ X Axis Pulse Output +
XP- X Axis Pulse Output -
XD+ X Axis Direction Output +
XD- X Axis Direction Output -
YP+ Y Axis Pulse Output +
YP- Y Axis Pulse Output -
YD+ Y Axis Direction Output +
YD- Y Axis Direction Output -
ZP+ Z Axis Pulse Output +
ZP- Z Axis Pulse Output -
ZD+ Z Axis Direction Output +
ZD- Z Axis Direction Output -
AP+ A Axis Pulse Output +
AP- A Axis Pulse Output -
AD+ A Axis Direction Output +
AD- A Axis Direction Output -
BP+ B Axis Pulse Output +
BP- B Axis Pulse Output -
BD+ B Axis Direction Output +
BD- X Axis Direction Output - B Axis Direction Output -
CP+ C Axis Pulse Output +
CP- C Axis Pulse Output -
CD+ C Axis Direction Output +
CD- C Axis Direction Output -
Description
EC500 User's Manual