Digital Dream EC500 User Manual page 7

5.1 Ethernet Communication Interface to PC
To setup the network on the computer side there are two ways for our device:
1) Setup with direct connection to a LAN network card;
2) Setup with connection via switch/router.
5.1.1 Setup with direct connection to a LAN network card.
Firstly connect the EC500 controller to PC by the ethernet cable.
To Setup the connection with direct cable connection click on the name of the connection and on the pop-up
window press the Properties button.Please note that for this action to work the user must have administrator
rights inWindows account.Control Panel -> Network and Internet -> Network Connections.
Pls remember to shut down the firewall of the computer before the connection.
Picture 5-2 EC500 Ethernet Commnication Setup
Digital Dream Mach3 Motion Controller Page -5 EC500 User's Manual