Stepper/Servo Motor Control Interface Connection - Digital Dream UC300 User Manual

5.1 USB Communication Port to PC
To setup the connection between the controller and the Mach3 software on computer,UC300 use the USB
port,as the Marked No.1 on Picture 5-1.

5.2 Stepper/Servo Motor Control Interface Connection

Digital Dream Mach3 Motion Controller
As the Marked No. 2 from Picture 5-2,there is the Stepper/Ser-
vo Interface.The device can be used to control machine tools
with stepper or servo motor controls with pulse and direction
signals.The option for users is 3-6 axis.
Picture 5-2 UC300 Stepper/Servo Mark and description
Motor Driver Connection(5V)
PIN Mark
XP+ X Axis Pulse Output +
XP- X Axis Pulse Output -
XD+ X Axis Direction Output +
XD- X Axis Direction Output -
YP+ Y Axis Pulse Output +
YP- Y Axis Pulse Output -
YD+ Y Axis Direction Output +
YD- Y Axis Direction Output -
ZP+ Z Axis Pulse Output +
ZP- Z Axis Pulse Output -
ZD+ Z Axis Direction Output +
ZD- Z Axis Direction Output -
AP+ A Axis Pulse Output +
AP- A Axis Pulse Output -
AD+ A Axis Direction Output +
AD- A Axis Direction Output -
BP+ B Axis Pulse Output +
BP- B Axis Pulse Output -
BD+ B Axis Direction Output +
BD- B Axis Direction Output - X Axis Direction Output -
CP+ C Axis Pulse Output +
C Axis Pulse Output -
CP-
CD+ C Axis Direction Output +
CD- C Axis Direction Output -
Page 5
Description
UC300 User's Manual