Table of Contents
Advertisement
Step 3: Connect to the electricity
supply
Warning: This appliance must be
earthed.
The flexible mains lead is supplied
connected to a BS 1363 fused plug,
having a fuse of 3 amp capacity.
If this plug does not fit the socket in
your home, it should be replaced with
a suitable plug as outlined below.
E (Earth)
GREEN / YELLOW
N (Neutral)
BLUE
Use a 3 amp fuse
The wires in the mains lead are
in a 13 amp plug.
coloured in accordance with the
following code: Green and yellow =
Earth, Blue = Neutral, Brown = Live.
As the colours of the wires in the
mains lead for the appliance may
not correspond with the coloured
markings identifying the terminals in
your plug, proceed as follows:
1. The wire which is coloured green
and yellow must be connected to
the terminal marked E
or coloured Green.
2. The wire which is coloured blue
must be connected to the terminal
marked N (Neutral), or coloured
Black.
3. The wire which is coloured brown
Installation Instructions
L (Live)
BROWN
(Earth)
29
must be connected to the terminal
marked L (Live), or coloured Red.
The
plug
and
accessible after installation.
Should
the
mains
appliance ever require replacing, we
recommend that this is carried out by
a qualified electrician who will
replace it with a lead of the same size
and temperature rating.
Step 4: Check edging strip
The edging strip is factory fitted to
the front side edges of the appliance
front frame. Th is strip provides the
c a b i n e t r y with extra protection from
any escape of heat.
When installing the product, ensure
that the edging strip is correctly located
on the outer edges of the front frame,
before positioning and securing the
appliance to the cabinet.
seal
handle
When securing the appliance, the
fixing screws provided are driven
through the edging strips into the
cabinet - the seal will straighten up
and sit flush to the cabinet when the
screws are fully home.
socket
must
be
lead
of
the
front frame
door
Advertisement
Table of Contents
