Table of Contents
Advertisement
– Fit the left and right hand guides to the new blade, place the spring (17) into its seat and re-fi t
the latch (4).
– Fit the blade assembly to the head (19), fully insert the pivot (14) and secure with the circlip (18).
5. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data for transfer via the USB cable supplied.
To view and manage this data, go to www.cembre.com and register in the dedicated area, then
download the free Cembre software CEM_SWBT01.
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
B-TC650NA
: To access the mini-USB
port (Ref. to fi g. 6) and connect the USB
cable to the computer it is necessary to
remove CBA-MTMK battery adapter.
Remove the screw (Ref. to fi g. 7 and 7a)
mini-USB
and slide the adapter out.
FIG. 6
FIG. 7
Screw
B-TC650NA
CBA-MTMK
FIG. 7a
– Following information applies in member states of the European Union:
USER INFORMATION in accordance with "Directives 2011/65/EU and 2012/19/EU."
The 'Not in the bin' symbol above when shown on equipment or packaging means that
the equipment must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed
guidelines for its separate collection. Appropriate waste separation, collection, environmentally compat-
ible treatment and disposal is intended to reduce harmful environmental eff ects and promote the reuse
and recycling of materials contained in the equipment. Unlawful disposal of such equipment will be sub-
ject to the application of administrative sanctions provided by current legislation.
9
Advertisement
Table of Contents
