General Characteristics - Cembre B35M-TFC Operation And Maintenance Manual

Battery operated hydraulic cutting tool
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
BATTERY OPERATED HYDRAULIC CUTTING TOOL

1. GENERAL CHARACTERISTICS

TOOL TYPE:
Application range:
Rated operating pressure
Dimensions LxWxH
Weight with battery
Motor
Battery type CB1820L
Recommended oil:
Safety:
Operating temperature
Battery charger ASC30-36
Input
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
– The acoustic power level emitted by the machine
L
is equal to .................................................................................................................................................... 69,3 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 Standard, and under
operating conditions much more severe than those normally found, certify that the weighted root mean
square in frequency of the acceleration the upper limbs are exposed to for each biodynamic reference
2
axis is 0,527 m/sec
max.
The part reference includes the following:
– Basic tool complete with battery.
– Spare battery.
– Battery charger (model depends on the tool version).
– Plastic carrying case.
B35M-TFC
bar (psi):
mm (inches):
kg (lbs):
Volt DC:
Volt / Ah:
°C (°F):
27044000
Volt / Hz:
W:
is equal to .............................................................................................................. 64,9 dB (A)
pA
is equal to ........................................................................................ 99,7 dB (C)
pCPeak
B35M-TFCE B35M-TFCT B35M-TFCA
suitable for cutting grooved contact wires and
conductors used on electric traction systems.
450 (6,500)
385 x 195 x 133 (15.2 x 7.7 x 5.2)
3,4 (7.5)
18 / 2.0 Li-Ion
ENI ARNICA ISO 22 or ESSO INVAROL EP22 or equivalent
the tool is equipped with a maximum pressure valve
-15 to +50 (+5 to +122)
UE
UK
27045000
220 - 240 / 50 - 60
18
AUS/NZ
USA/CAN
27047000
27046000
115 / 60
85
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B35m-tfcaB35m-tfceB35m-tfct

Table of Contents