Installing A Drive Blank; Removing The Drive Carrier - Dell EMC PowerEdge R6525 Installation And Service Manual

Figure 33. Removing a drive blank
Next steps
1. Installing a drive or replace the drive

Installing a drive blank

Prerequisites
1. Follow the safety guidelines listed in the
2. If installed, remove the front
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
Figure 34. Installing a drive blank
Next steps
1. If removed, install the front

Removing the drive carrier

Prerequisites
1. Follow the safety guidelines listed in the
2. If installed, remove the front
3. Using the management software, prepare the drive for removal.
If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are
off, the drive is ready for removal. For more information, see the documentation for the storage controller.
44 Installing and removing system components
blank.
Safety instructions.
bezel.
bezel.
Safety instructions.
bezel.