Dell EMC PowerEdge R6525 Installation And Service Manual page 14

Hide thumbs Also See for EMC PowerEdge R6525:
Table of Contents

Advertisement

Table 6. Rear view of the system (continued)
Item
Ports, panels, or slots
10
OCP NIC port (optional)
11
NIC port (2)
12
BOSS S2 card (optional)
For more information about the ports, see the
Figure 8. Rear view of the 8 x 2.5-inch drive system.
Table 7. Rear view of the system
Item
Ports, panels, or slots
1
Power supply unit (PSU 1)
2
PCIe expansion card riser
(slot 1)
3
PCIe expansion card riser
(slot 2)
4
USB 2.0 port (1)
5
PCIe expansion card riser
(slot 3)
6
Power supply unit (PSU
2)
7
VGA port
8
USB 3.0 port (1)
14
System overview
Icon
N/A
N/A
Technical Specificatio ns
Icon
N/A
N/A
N/A
Description
● To reset iDRAC using system ID, ensure that the
system ID button is enabled in the iDRAC setup.
● If the system stops responding during POST, press
and hold the system ID button (for more than 5
seconds) to enter the BIOS progress mode.
This port supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is
connected to the system board.
This slot supports the BOSS S2 module
section.
Description
For more information about the PSU configurations, see the
www.dell.com/poweredgemanuals
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals
This port is USB 2.0-compliant.
The expansion card riser enables you to connect PCI
Express expansion cards. For more information about the
expansion cards that are supported on your system, see
www.dell.com/poweredgemanuals
For more information about the PSU configurations, see the
Technical Specifications
section.
Enables you to connect a display device to the
system. For more information, see the
poweredgemanuals
section.
This port is USB 3.0-compliant.
section.
section.
section.
section.
www.dell.com/

Advertisement

Table of Contents
loading

This manual is also suitable for:

E67s

Table of Contents