Table of Contents
Advertisement
Appendix B: FEPIM Specifications
B.2
DELFX-UI
The DELFX-UI shown in Figure B-2 uses an SC style connector that
supports multimode fiber optic cabling. Specifications for the DELFX-UI
are listed in Table B-1, below.
Cable Type
50/125 µm fiber optic
62.5/125 µm fiber optic
100/140 µm fiber optic
The transmitter power levels and receive sensitivity levels
listed are peak power levels after optical overshoot. A peak
power meter must be used to correctly compare the values
given above to those measured on any particular port. If power
levels are being measured with an average power meter, add
3 dB to the measurement to compare the measured values to
the values listed above.
B-2
Figure B-2 DELFX-UI
Table B-1 Transmitter Power
Worst Case Budget
6.0 dB
9.0 dB
15.0 dB
2286-40
Typical Budget
9.0 dB
12.0 dB
18.0 dB
DELHE-UA User's Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Expansion module DELHE-UA and is the answer not in the manual?
Questions and answers