Advertisement
Quick Links
Nava Three Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x14
x17
x10
nut x10
L
K
M
N
screw
washer
cover
bracket
x4
x8
x3
x3
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
slide
x39
rail x3
rail x3
rail x3
Q
O
P
R
screw
bolt
small
small
bolt
locking
x4
x34
x15
nut x15
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
slide
wedge
rail x3
x8
T
S
U
Allen plastic
seal
key x1
glide x4
x3
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1
Advertisement
Related Manuals for Mocka Nava Three Drawer
Summary of Contents for Mocka Nava Three Drawer
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 18x screws (E). Insert 6x bolts (C) into panels [3] and [4]. Tighten with screws (E). Tighten with a screwdriver. Place 3x covers (N) over a screwdriver. the brackets (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panel [4] to panels [5] and [6] with 3x dowels (A) and secure with 3x locking nuts (D). Tighten with a screwdriver. with 3x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [2] to the rest of the unit using 4x dowels (A) and secure Slide panel [7] down along the grooves between the panels [3] and [4]. with 4x screws (B) as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panels [8] and [9] to panel [2] using 10x screws (B). Tighten with Attach panels [10] to panels [8] and [9] with 16x screws (R). Tighten with a screwdriver. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Slide panel [7] down along the grooves between the panels [3] and [4]. Tighten with the Allen key (T). Attach 4x plastic glides (U) to the legs using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach panel [3] and [4] to [1] with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Secure with 4x screws (E) and with a screwdriver. Slide panel [16] along the grooves between the tighten with a screwdriver. panels [13] and [14] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (N) until it catches on to the top of the back side of the unit as shown using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. the seal (S). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 (V). Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure the unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Nava Three Drawer and is the answer not in the manual?
Questions and answers