Advertisement
Quick Links
Nava Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
locking
dowel
x20
x24
x16
nut x16
M
N
O
cover
small
bracket
bolt
x6
x6
x30
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
H
screw
slide
slide
slide
x78
rail x6
rail x6
rail x6
Q
P
R
screw
bolt
small
locking
x4
x52
nut x30
Hardware Supplied
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
K
I
slide
wedge
screw
washer
rail x6
x8
x8
S
T
U
Allen
plastic
long
seal
key x1
glide x4
x6
dowel
and hammer required
L
V
W
safety
screw
x2
strap x2
x
4
A1
x2
X
Y
Z
wall
wall
washer
anchor
screw
x4
x2
x2
Wall Strap
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Mocka Nava Six Drawer
Summary of Contents for Mocka Nava Six Drawer
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 (E). Flip panel [5] over, attach 3x slide rails (G) and a screwdriver. secure with 9x small screws (E). Insert 4x bolts (C) into panel [5]. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panels [6] to panel [4] with 2x dowels (A) and secure screws (E). Tighten with a screwdriver. Place 6x covers (N) over with 2x locking nuts (D). Tighten with a screwdriver. the brackets (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Attach panel [8] to panel [4] with 1x dowel (A) and secure with 1x Attach panel [5] to panels [6] with 2x long dowels (A1) and secure with 2x locking nuts (D). Tighten with a screwdriver. locking nut (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Attach panel [3] to panels [6] and [8] with 3x dowels (A) and secure Attach panels [6] to panel [5] with 2x locking nuts (D). Tighten with a screwdriver. with 3x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Nava Six Drawer Assembly Instructions Attach panel [8] to panel [5] with 2x screws (B). Tighten with a screwdriver. Slide panel [9] down along the grooves between the panels [3] and [4]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Attach panel [2] to the rest of the unit using 6x dowels (A) and secure Attach panels [12] to panels [10] and [11] with 16x screws (R). with 6x screws (B) as shown. Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Attach Legs [13] to panels [12] with 4x washers (L) and 4x bolts (Q). Tighten with a screwdriver. Tighten with the Allen key (T). Attach 4x plastic glides (U) to the legs using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 Nava Six Drawer Assembly Instructions Slide panel [9] down along the grooves between the panels [3] and [4]. Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 [15]/[16] with 1x dowel (A) and using 5x small locking nuts (P). Tighten with a screwdriver. Slide panel [19] along the grooves between the panels [17] and [18] to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 11 (N) until it catches on underside of the side panels as shown. Secure with 4x screws (E) and tighten with a screwdriver. the seal (S). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 12 [9] using 2x washers (Z) and 2x screws (W). Tighten with a anchors (X) and 2x screws (Y). Ensure unit is balanced and steady screwdriver. before use. You’re done, enjoy! mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Nava Six Drawer and is the answer not in the manual?
Questions and answers