Advertisement
Quick Links
Nava Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
D
screw
bolt
dowel
locking
x14
x20
x12
nut x12
L
K
M
N
screw
washer
cover
bracket
x4
x8
x8
x8
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
E
F
G
screw
slide
slide
x64
rail x4
rail x4
Q
O
P
screw
bolt
small
small
bolt
locking
x4
x20
nut x20
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
J
H
I
slide
wedge
slide
rail x4
rail x4
x8
T
R
S
U
Allen plastic
seal
x40
key x1
glide x4
x8
V
W
X
safety
screw
wall
x2
strap x2
anchor
x2
Wall Strap
Y
Z
wall
washer
screw
x4
x2
1
Advertisement
Related Manuals for Mocka Nava Four Drawer
Summary of Contents for Mocka Nava Four Drawer
- Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 2 24x screws (E). Insert 8x bolts (C) into panels [3] and [4]. Tighten with screws (E). Tighten with a screwdriver. Place 8x covers (N) over a screwdriver. the brackets (M) as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 3 Attach panel [4] to the unit with 4x dowels (A) and secure with 4x with 4x locking nuts (D). Tighten with a screwdriver. locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 4 Nava Four Drawer Assembly Instructions Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Slide panel [7] down along the grooves between the panels [3] and [4]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 5 Slide panel [7] down along the grooves between the panels [3] and [4]. Attach panel [1] to the unit with 4x dowels (A) and secure with 4x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 6 Attach panel [2] to the unit with 4x dowels (A) and secure with Attach panels [10] to panels [8] and [9] with 16x screws (R). 4x screws (B). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 7 Attach Legs [11] to panels [10] with 4x washers (L) and 4x bolts (Q). screws (B). Tighten with a screwdriver. Tighten with the Allen key (T). Attach 4x plastic glides (U) to the legs using a hammer as shown. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 8 Secure with 4x screws (E) and Slide panel [16] along the grooves between the panels [13] and [14] tighten with a screwdriver. to form the base of the drawer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 9 (N) until it catches on to the top of the back side of the unit as shown using 2x washers (Z) and the seal (S). 2x screws (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
- Page 10 (V). Fasten to the wall using 2x washers (Z), 2x wall plugs (X) and 2x screws (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
Need help?
Do you have a question about the Nava Four Drawer and is the answer not in the manual?
Questions and answers