How To Change The Filters; Cleaning With On-Board Tools - Titan T3200 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

This vacuum is equipped with a HEPA media filter and a

secondary filter� These filters capture fine dust particles

and protect the motor from dirt� Accumulated dirt in the

bag compartment will be collected on the filters and may

restrict motor performance� It is important to change the

filters regularly�

How to Change the HEPA Media Filter

1�

Unplug the vacuum� Remove the filter cover below the

dust compartment cover (Fig� 1)�

2� Remove the HEPA media filter by pushing in the tab

on the left and rotating out (Fig� 2)�

3� Insert a new filter and replace the filter cover�

How to Change the Secondary Filter

1�

Unplug the vacuum� Remove the bag compartment

cover and remove the vacuum bag�

2� Remove the secondary filter by sliding it out from

under the bag supporter (Fig� 3)�

3� Insert a new filter, replace the bag and bag

compartment cover�

Note: Filters cannot be washed or re-used�

This vacuum is equipped with on-board cleaning

tools, including a metal telescopic wand, stretch

hose, dusting brush and crevice tool�

1�

To use the cleaning tools, lift the hose handle

straight up from the vacuum (Fig� 1)�

2� Extend the wand by pulling the button back

and pulling the smaller wand out of the larger

wand (Fig� 2)�

3� Attach any of the tools to the end of the

wand, or directly onto the hose handle�