How To Adjust The Height Of The Nozzle; Edge Cleaning Feature; Full Bag Indicator; How To Change The Vacuum Bag - Titan T3200 Owner's Manual

HOW TO ADJUST THE HEIGHT
How to Adjust the
Nozzle Height
When the vacuum handle is
reclined, rotate the height
adjustment dial to the type of
floor being vacuumed (Fig� 1)�

EDGE CLEANING FEATURE

The edge cleaning feature provides improved cleaning of carpets near walls and
stationary furniture� For maximum edge cleaning, position the right side of the
vacuum from the user's perspective near walls or stationary furniture�

FULL BAG INDICATOR

The full bag indicator changes to red when the bag is full or when
there is a clog in the vacuum�
• If the red indicator appears:
• Change the vacuum bag�
• If the vacuum bag is not full check the hose for a clog�
• When cleaning with a tool (dusting brush or crevice tool), the
red indicator may appear� In this case, continue cleaning�

HOW TO CHANGE THE VACUUM BAG

Always operate the vacuum with a vacuum bag
installed� Bags should be changed when they
are 2/3 full�
1� Unplug the vacuum� Remove the bag
compartment cover (Fig� 1)�
2� Remove the bag by grasping the sides of the
bag collar and pulling straight off� Attach a
new vacuum bag by pushing the collar onto
the inlet (Fig� 2)�
3� Pull out the bottom corners of the new bag
to expand the bag capacity (Fig� 3)�
4� Insert the bottom of the bag compartment
cover into the groove on the bag
compartment housing� Press the bag
compartment cover into place, closing
6 it tightly�
Settings for the
floor brush height adjustment dial
Shag/ Plush Medium
Frieze Carpet Pile
Carpet Carpet
Fig� 1
Fig� 1
Fig� 3
General Low
Setting Pile
Carpet
& Bare
Floors
Fig� 1
Fig� 2