3.9
PROTOCOL PORTS CONFIGURATION SCREEN
When to Use
To display the current ports and port types associated with a VLAN and
protocol selected in the Protocol VLAN Configuration screen described in
Section
3.8.
The line of information selected must have been saved before it
NOTE
can be used to access the Protocol Ports Configuration screen
as described below.
How to Access
Use the arrow keys to highlight a line of information under the VLAN
ID/Protocol Type/Configured Ports BitMap columns in the Protocol
Priority Configuration screen and press ENTER. The Protocol Ports
Configuration screen displays.
Screen Example
Module Type: xxxxx-xx
Slot Number: xx
Current Protocol Ports
VLAN ID : 1
Port: [ 31]
SAVE
Figure 3-10 Protocol Ports Configuration Screen
802.1Q VLAN User's Guide
Protocol Ports Configuration Screen
6C105 LOCAL MANAGEMENT
Protocol Ports Configuration
15
30
Protocol: 0X800
ATM PVC VCI-1 VPI-23
PREVIOUS
NEXT
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Port Type
Ethernet
ATM PVC VCI-1 VPI-23
[ DELETE ALL PORTS ]
EXIT
XX.XX.XX
RETURN
2599_24
3-31