Cabletron Systems 802.1Q VLAN User Manual page 58

Chapter 3: VLAN Configuration
Field Definitions
Table 3-7 Protocol Ports Configuration Screen Field Definitions
Use this field ...
Current
Protocol Ports
(Read-Only)
Port Type
(Read-Only)
VLAN ID
(Read-Only)
Protocol
(Read-Only)
Port
(Selectable)
DELETE ALL
PORTS
(Selectable)
3-32
To ...
Display the current ports associated with the VLAN ID.
Display the Port Type associated with the port in the
Current Ports column.
Display the VLAN ID that is in the line of information
highlighted in the Protocol VLAN Configuration screen.
Display the protocol in the line of information highlighted in
the Protocol VLAN Configuration screen.
Step through the ports to select a port to add of deleted
from the VLAN ID shown in the VLAN ID field. When a port
is displayed the associated port type is displayed to the
right of the port number. In
the associated port type is, ATM PVC VCI-1 VPI-23.
Add or delete a port selected in the Port field of the VLAN
ID displayed, or add all ports to, or deleted all ports that
are configurable on the device. All ports includes, all
physical and virtual ports such as ATM ports if supported.
In Figure 3-10, the priority is "0". The selections are as
follows:
ADD PORT – adds the port selected in the Port field.
ADD ALL PORTS – adds ALL PORTS that are
configurable to the VLAN ID shown in the VLAN ID field.
DELETE PORT – deletes the port selected in the Port
field.
DELETE ALL PORTS – deletes ALL PORTS that are
configurable from the VLAN ID shown in the VLAN ID
field.
Figure 3-10, the port is 31 and
802.1Q VLAN User's Guide