Cabletron Systems 802.1Q VLAN User Manual page 62

Chapter 3: VLAN Configuration
11. Use the SPACE bar to step sequentially through the previously
configured VLAN ID numbers. When the number 0002 (the new
VLAN ID) is displayed, the FID field updates to 0002, and the VLAN
Name field updates showing the name assigned to this VLAN, TEST
VLAN.
12. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. The PVID for Port 3 is now configured to
the TEST VLAN. The TEST VLAN is also added to the Port VLAN
List for Port 3 with a frame format of Untagged. The screen should
now look like
Module Type: xxxxx-xx
Slot Number: xx
Port
1
2
3
4
5
6
7
8
9
10
11
12
SAVE
Now that port 3 belongs to the TEST VLAN, we will designate one port
as a 1Q Trunk port for a connection to another VLAN aware switch. This
1Q Trunk port will carry traffic from all VLANs, allowing VLAN frames
to maintain their VLAN ID across multiple switches.
For the purposes of this walkthrough, port 10 will be configured
NOTE
as the trunk port.
3-36
Figure 3-12.
6C105 LOCAL MANAGEMENT
Port Assignment Configuration
Port Mode VLAN ID
[0001]
[1D TRUNK]
[1Q TRUNK] [0001]
[HYBRID] [0002]
[0001]
[HYBRID]
[HYBRID] [0001]
[HYBRID] [0001]
[0001]
[HYBRID]
[0001]
[HYBRID]
[HYBRID] [0001]
[0001]
[HYBRID]
[0001]
[HYBRID]
[0001]
[HYBRID]
PREVIOUS
Figure 3-12 Walkthrough Stage Two
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
VLAN Name
FID
0001 Default VLAN
Default VLAN
0001
0002 TEST VLAN
0001 Default VLAN
Default VLAN
0001
0001 Default VLAN
0001 Default VLAN
0001
Default VLAN
0001 Default VLAN
0001 Default VLAN
0001
Default VLAN
0001
Default VLAN
NEXT EXIT
802.1Q VLAN User's Guide
XX.XX.XX
RETURN
25992-10