Cabletron Systems 802.1Q VLAN User Manual page 60

Chapter 3: VLAN Configuration
3. Use the arrow keys to highlight the VLAN ID field. Assign a number
to a new VLAN by typing the number "2" in the VLAN ID field.
4. Use the arrow keys to highlight the FID field. In this example we will
assign the new VLAN to FID 2 by typing the number "2" in the FID
field.
5. Use the arrow keys to highlight the VLAN Name field. Type "TEST
VLAN" in the VLAN Name field. Press ENTER.
6. Use the arrow keys to highlight the ADD/DEL field.
7. Press the SPACE bar to toggle the field to ADD. Press ENTER. The
VLAN is added to the list.
8. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. The message "SAVED OK" displays. The
screen refreshes and VLAN 2, the TEST VLAN has been added to the
Device VLAN Configuration screen and all learning of MAC
addresses will be updated in FID 2. The screen should now look like
Figure 3-11.
This new VLAN is currently disabled, as the DISABLED field to
NOTE
the far right shows. When all the rules and settings for the
VLAN are in place, it will be necessary to return to this screen
and enable the VLAN.
3-34 802.1Q VLAN User's Guide