Cabletron Systems 802.1Q VLAN User Manual page 63

13. Use the arrow keys to highlight the Port Mode field for port 10. Use
the SPACE bar or BACKSPACE key to step sequentially through the
possible settings of the port until 1Q TRUNK is displayed.
14. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. Port 10 is now acting as a 1Q Trunk port and
every VLAN is in its Port VLAN List. The frame format for every
VLAN is also set to tagged. The screen should now look like
Figure 3-13.
Module Type: xxxxx-xx
Slot Number: xx
Port
1
2
3
4
5
6
7
8
9
10
11
12
SAVE
Now that the TEST VLAN and the 1Q Trunk connection are set up, we
can proceed to activate the TEST VLAN.
802.1Q VLAN User's Guide
6C105 LOCAL MANAGEMENT
Port Assignment Configuration
VLAN ID
Port Mode
[HYBRID] [0001]
[0001]
[HYBRID]
[HYBRID] [0002]
[HYBRID] [0001]
[0001]
[HYBRID]
[0001]
[HYBRID]
[HYBRID] [0001]
[HYBRID] [0001]
[0001]
[HYBRID]
[0001]
[1Q TRUNK]
[HYBRID] [0001]
[0001]
[HYBRID]
PREVIOUS
Figure 3-13 Walkthrough Stage Three
Quick VLAN Walkthrough
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
VLAN Name
DEFAULT VLAN
DEFAULT VLAN
TEST VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
NEXT EXIT
XX.XX.XX
RETURN
25991-11
3-37