Cabletron Systems 802.1Q VLAN User Manual page 64

Chapter 3: VLAN Configuration
15. On the 802.1Q VLAN Main Menu screen, use the arrow keys to
highlight the DEVICE VLAN CONFIGURATION menu item.
Press ENTER. The Device VLAN Configuration screen,
displays.
Module Type: xxxxx-xx
Slot Number: xx
VLAN ID
1
2
VLAN ID: 1
SAVE
16. Use the arrow keys to highlight the Admin Status field of
VLAN ID 2, the TEST VLAN.
17. Press the SPACE bar to toggle the field to display Enabled.
18. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
19. Press ENTER. The message "SAVED OK" displays. The switch
activates the new VLAN.
This effectively completes the configuration of a single VLAN, assigning
it to a port, and configuring the switch to forward the frames received on
that port to be forwarded with the VLAN information included in the
frame.
3-38
6C105 LOCAL MANAGEMENT
Device/VLAN Configuration
Forward Default VLAN Out All Ports: [NO]
FID VLAN Name
1 DEFAULT VLAN
2 TEST VLAN
FID: 2 VLAN Name: DEFAULT VLAN
Figure 3-14 Walkthrough Stage Four
Figure
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Admin Status
[Enabled]
[Enabled]
EXIT RETURN
802.1Q VLAN User's Guide
3-14,
[ADD]
25993-12