Cabletron Systems 802.1Q VLAN User Manual page 53

Table 3-6 Protocol VLAN Configuration Screen Field Definitions (Cont'd)
Use this field ...
Protocol Type
(Selectable)
Feature Status
(Toggle)
Action
(Toggle)
802.1Q VLAN User's Guide
Protocol VLAN Configuration Screen
To ...
Select one of the following protocol types:
IP – pertains to all IP associated Ether Types (i.e.,
0x0x0800, 0x0806, and, 0x8035).
IPX – pertains to all IPX associated Ether Types (i.e.,
0x8137, 0x8138, and special cases, 0x0100 [LLC Type 1
Encapsulation] and 0x0101 [LLC Type 2 Encapsulation]).
Appletalk – pertains to all Appletalk associated Ether
Types (i.e., 0x809B and 0x80F3).
Netbios – pertains to all Netbios associated Ether Types
(i.e. 0x0102).
Banyan Vines – pertains to all Banyan Vines associated
Ether Types (i.e., 0x0103 and 0x0BAD).
DECNET – pertains to all DECNET associated Ether
Types.
CUSTOM – when this field is chosen, Ether Type "0x0"
displays so the user can input a particular Ether Type.
NOTE: Any Ether type selected or entered in the Ether
type field and saved will become part of the selection in
the protocol field.
For details, refer to
Enables or disables the entries. The entries can be made
but are not affective until this field is set to ENABLED. The
choices for this field are:
ENABLED
DISABLED
Used to add or delete an entry (Priority) and its protocol.
This field toggles between [ADD/MODIFY] and [DELETE].
ADD/MODIFY– adds the new Priority and Protocol Type
entries (for example, Priority [0] and Protocol Type
[Banyan Vines]).
DELETE – deletes an existing entry with the associated
priority (for example, Priority [0] and Protocol Type
[Banyan Vines]).
Section 3.8.1.
3-27