Cabletron Systems 802.1Q VLAN User Manual page 61

Module Type: xxxxx-xx
Slot Number: xx
VLAN ID
1
2
VLAN ID: 1
SAVE
It is now time to assign a port to this new VLAN.
9. Use the arrow keys to highlight the RETURN command at the bottom
of the screen. Press ENTER. The 802.1Q VLAN Configuration Menu
screen displays. Use the arrow keys to select the PORT
ASSIGNMENT CONFIGURATION menu item and press ENTER.
The Port Assignment Configuration screen displays.
For the purposes of this walkthrough, port 3 will be configured.
NOTE
10. Use the arrow keys to highlight the VLAN ID field for the module and
port combination you wish to change.
As this port will connect to a single workstation, and is not to be
NOTE
used for switch-to-switch communications, it is not necessary
to change the PORT MODE from the default setting of
HYBRID
802.1Q VLAN User's Guide
6C105 LOCAL MANAGEMENT
Device/VLAN Configuration
Forward Default VLAN Out All Ports: [NO]
FID VLAN Name
1 DEFAULT VLAN
2 TEST VLAN
FID: 2 VLAN Name: TEST VLAN
Figure 3-11 Walkthrough Stage One
.
Quick VLAN Walkthrough
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Admin Status
[Enabled]
[Disabled]
RETURN
EXIT
[ADD]
25993-09
3-35