Safety Precautions - Carrier 16LJ-F Series Installation Manual

1. Safety precautions

Be sure to follow the instructions and requirements on safety described in this manual.
We explain about a harm or damage if a chiller is used with mistaken usage ignoring
these precautions.
WARNING
CAUTION
Symbol conventions
Refer to advice that must be observed.
Leave the installation work to professionals
Leave the installation work to
professionals. Inadequate work may
cause a water leakage, shock, fire,
etc.
Unit shall be firmly fixed
Unit shall be firmly fixed by bolts/nuts
on the foundation which has
adequate strength to carry the
system.
Strength poverty or fixing defect
may cause a water leakage and/or
turnover of the unit in case.
Follow the applicable codes and chiller
specifications
Follow the applicable codes and
chiller specifications.
Inadequate wiring capacity or
defective works may cause shock,
fire, etc.
Failure to observe this instruction may cause serious injury or death.
Failure to observe this instruction may result in impediment or damage
to the product or the property.
WARNING
Must be
observed
Must be
observed
Must be
observed
1
Rigging and moving of the unit shall be
done by the licensed professionals
Rigging and moving of the unit shall
be done by the licensed professionals
following the manufacturer's
instructions.
Inappropriate operation may cause
accidents such as turnover, falling, etc.
The installation location shall be free from
flammable circumstances
The installation location shall be free
from flammable circumstances and/or
corrosive gases otherwise it may
cause fire.
Must be
observed
Must be
observed