Table of Contents
Advertisement
PAGE 13
Preparing Your Dishwasher (Continued)
FILLING THE RINSE AID DISPENSER CONTINUED
Step 3 Re-insert the Rinse-aid cap and screw in a clockwise direction to lock it in place. Refer to Figure 11.
Figure 11- Re-fitting the cap onto the Rinse-aid dispenser.
ADJUSTING THE RINSE-AID DISPENSER
You can increase or decrease the amount of Rinse-aid being dispensed by your dishwasher for each cycle, using
the adjustment dial.
Turn the Rinse-aid dispenser dial to a number between 1 and 6, where the higher number dispensers more rinse-
aid. If you are finding your dishes are not drying properly or a spotted after the program has finished, adjust the
dial to the next higher number until you find that your dishes are spot-free. Reduce the setting if there are sticky
whitish coloured stains on your dishes or a bluish film on your glassware or knife blades.
Note. The factory default setting is 4, for the rinse-aid.
Adjustment dial
Figure 12- Rinse aid dispenser dial.
DISHWASHER DETERGENT
The chemical ingredients that compose the dishwasher detergent are necessary to remove, break-down and
dispense all dirt out of the dishwasher. Most of the commercial quality detergents are suitable for this purpose.
Tip! If you are finding that you are unhappy with the washing performance of your dishwasher, try using
alternative wash programs (i.e. a more intensive program) and also try using alternative dishwasher detergents.
We do find that some brands outperform others in terms of washing results.
WARNING!
Proper use of dishwashing detergent.
•
Use only detergent specifically made for dishwashers. Keep your detergent dry and fresh.
•
Don't put powdered detergent into the dispenser until you are ready to start a new wash cycle.
WARNING!
Dishwasher detergent is corrosive and highly dangerous! Always keep dishwasher detergent out
of reach of children and follow the instructions provided by the dishwasher detergent brand for handling and
storage.
INALTO.HOUSE
Advertisement
Table of Contents
