How To Use - Gorenje B800E Instruction Manual

 Take special care when emptying and cleaning
the blender jug, as the blades are extremely
sharp.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
This guideline is the frame of a European-wide
validity of return and recycling on Waste
Electrical and Electronic Equipment.

How to Use

1. Mount the Measuring Cup (1) onto the Lid (2).
Secure the Lid onto blender jug and press
down ( FIG 1)
2. Place the blender jug on the Main body and
rotate anticlockwise (figure 2). See also
chapter ' Safety locking system'.
3. Remove the lid or the measuring cup from the
blender jug and place ingredients into the jug.
4. Place the lid with the measuring cap back onto
the blender jug and rotate the blender
anticlockwise to lock. See also chapter 'Safety
locking system'. Do not exceed the maximum
indicated level-1.5 litres.
5. Using the selector control knob, select the
desired blending speed1, 2 ,3 or PULSE.
6. The PULSE function remains on as long as the
PULSE button is pressed down, for greater
control when blending, e.g. when chopping
nuts or chocolates, or crushing ice.
7. Setting 1,2 and 3 will provide continuous
blending until the control knob is turned to the
'0' position.
8. You can add further ingredients while blending.
For this, remove the measuring cup from the
pouring hole.
9. After you have completed blending, turn the
control knob to the '0' position.
Using your coffee mill
1.
Fill with the required amount of coffee
(max.40g) into the milling bowl(15)
2.
Mount the Milling cover (14) onto the milling
bowl (15).and press down ( FIG 3)
3.
Place the coffee mill on the Main body and
rotate anticlockwise (figure 4). See also
chapter ' Safety locking system'.
4. Using the selector control knob, select the
desired blending speed1, 2 ,3 or PULSE.
5.
The fineness of the ground coffee depends on
the quantity of beans and the grinding time.
6.
To obtain ground coffee, the following
quantities and times apply.
7.
40g: max. 15-30sec.
8.
Shorter grinding times result in somewhat
coarser coffee grains.
9. The PULSE function remains on as long as the
PULSE button is pressed down, for greater
control when milling.
10. Setting 1 ,2 and 3 will provide continuous
milling until the control knob is turned to the '0'
position.
Safety locking system
With safety in mind, this blender and coffee mill are
designed with a safety locking system. Unless the
lid and blending jug or coffee mill are positioned
correctly and locked in place, the blender or coffee
mill will not operate.
For correctly assembling the blender, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the blending jug onto the main body with
the handle to the right. The jug is placed correctly
when the arrow on the jug is positioned right
above the open lock on the motor base.
3. Turn the blending jug to the right until you hear a
slight click. The arrows on the motor base and
blending jug should now be aligned with each
other. If this is the case, the blending jug is locked
20