Advertisement
Quick Links
Advertisement
Related Manuals for WATSON C9
Summary of Contents for WATSON C9
- Page 1 ASSEMBLY C9 Desk Accessories 360.394.1300 watsonfurniture.com V.2.01 08/2020...
- Page 2 Pencil Open Pendant Pencil Pendant Pencil File Pendant File Pendant Hardware NOTE: C9 Pendant Storage cannot be used in combination with C9 Mobile Desks. M6-1.0x12mm Low M6-1.0x8mm Low C9 File Pendant, Pencil/File Pendant, and Pencil/Box Pendant Profile Cap Screw Profile Cap Screw Storage cannot be used on 24”...
-
Page 3: Attach Brackets
(3) screws, as shown. M6-1.0x8mm Low Profile Cap Screw ( 0001259 ) Hook Pendant onto Rail Hook bracket (a.) from step 1 onto the inside of the side rail of the desk as shown below. 3 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS... - Page 4 Mount the Third Bracket Insert (2) screws (0001140) through the holes in the bracket into the threaded inserts in the under-surface support rail. Tighten with a 3mm Hex wrench. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 4 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 5 File Drawer Only If the Pendant Storage includes a file drawer, install the file bars into place in the notches in the drawer body, as shown below. No hardware is needed for this step. 5 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 6 With key inserted into the lock core, insert lock core into the lock body and firmly turn counterclockwise, remove key and lock is installed. A change tool (078500) is required to remove cores. A firm clockwise turn removes the lock core. 6 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 7 Hardware M6 x 1 x 8mm Low M6-1.0x12mm Low M4 X 5mm Cap Profile ( 0001259 ) Profile Cap Screw Screw ( 0001594) ( 0001140 ) Tools 3mm Hex Key 2.5 mm Hex Key 7 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 8 For a lef t-hand installation on an adjustable desk : justif y the front bracket to the right. M6 x 1 x 8mm Low Profile ( 0001259 ) 8 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 9 Cabinet to the desk rail. (c) Mount the third bracket. Insert (2) screws (0001140) through the holes in the bracket into the threaded inserts in the under- surface support rail. Tighten with a 3mm Hex wrench. 9 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 10 Install Back Panel After CPU has been installed and cables have been managed, hook back panel on the rails on the back of the unit. 10 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 11 C9 Corner Desk Screen with Markerboard Hardware M6 x 1 x 8mm Low M6-1.0x12mm Low Rail Nut Profile ( 0001259 ) Profile Cap Screw ( 0001120 ) ( 0001140 ) Tools 3mm Hex Key 11 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 12 It is helpful to leave the side bracket a bit loose for side to side adjustments when mounting screen. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 12 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
-
Page 13: Install Screen
(2) M6 x 8mm low profile screws (0001259) thru medallion bracket and into the rail bracket. Tighten Rail Bracket to rail nut connection. M6 x 1 x 8mm Low Profile ( 0001259 ) 13 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS... - Page 14 (b) This will lock the component into place, creating a secure connection. Note : Pencil Cup included with Markerboard Screen, Hook included with Slot ted Screen. 14 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 15 C9 Straight Desk Screen Components C9 Desk Screen Screen Brackets Hardware M6-1.0x12mm Low Rail Nut Profile Cap Screw ( 0001120 ) ( 0001140 ) Tools 3mm Hex Key 15 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 16 Align the desk screen brackets with the holes in the rail nuts and attach with (2) screws (001140) for each bracket. The brackets should face outward as shown. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 16 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 17 Lower the screen into place on the brackets. While one person holds the screen in place the other person can move to step 5 M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 17 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 18 M6 x 12mm screws (0001140) into the lower holes, thru the bracket and into the screen.Tighten up all M6 x 12mm screws on screen and rail brackets with the 3mm hex wrench. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 18 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 19 Modesty Panel Brackets Hardware M6-1.0x12mm Low Rail Nut 34mm DIA M10x1.5 Nylon Shoulder Washer Profile Cap Screw ( 0001120 ) Thumbscrew .75x.075 ( 0001140 ) ( 0001154) ( 0001408 ) Tools 3mm Hex Key 19 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 20 Loosely attach the Modesty Panel brackets with (2) screws (0001140) per bracket. The brackets can be installed in two different orientations depending on how far the Modesty Panel should be inset. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 20 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 21 Install thumbscrews (0001154) into the Modesty Panels with provided spacers (0001408). Make sure the spacer’s flange faces the knob of the thumbscrew. 34mm DIA M10x1.5 Nylon Shoulder Washer Thumbscrew .75x.075 ( 0001154) ( 0001408 ) 21 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 22 Slide the thumbscrews into the brackets until they are in place. Once the Modesty Panel is in the desired position, tighten the screws that secure the Modesty Panel brackets. 22 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 23 Be sure to use the outermost holes in the bracket (a). Attach the utility power bracket assembly to the frame rail using 2 screws (0001140) (b). M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 23 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 24 Attach Utility Power Unit Clip the utility power unit into the utility power bracket assembly. No hardware is needed for this step. 24 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 25 Firmly push them together until the angled surfaces are touching. Rail Nut ( 0001120 ) Attach Bracket to Rail Attach the power unit bracket to the rail nuts using (2) screws (0001140). M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 25 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 26 Slide the Dean Power unit onto the bracket so that the bracket is centered on the power unit (a.). Next insert the set screw into the bracket until the screw is tight against the power unit (b.). M4-0.7x6mm Set Screw ( 0001123) 26 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 27 (0001140), with the long side of the bracket facing outwards, as shown below. Slide along the rail until placed in the correct location and tighten screws. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 27 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 28 Attach the E-Chain bracket to the rail nuts using (2) screws (0001140), as shown below. Slide along the rail until placed in the correct location and tighten screws. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 28 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 29 Inner Rail E-Chain Bracket Rotate the inner rail E-Chain bracket into the slot that runs length-wise underneath the top plate of the rail. Hold this bracket against the underside of the top plate of the rail. 29 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...
- Page 30 Attach the three parts with two screws (0001140) into the tapped holes of the inner-most bracket. The outer bracket should be pressed against the rail. M6-1.0x12mm Low Profile Cap Screw ( 0001140 ) 30 C9 DESK ACCESSORY ASSEMBLY INSTRUCTIONS...