Voltage Specification; Connecting Power Supply - Flash FL-202 BEAM 5R Manual

Moving Head FL-202 BEAM 5R F1000363
5.2

Voltage specification

Input Voltage
100~245V
5.3

Connecting power supply

The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
5
Total Power
300W
Frequency
50/60Hz
www.flash-butrym.pl