Table of Contents
Advertisement
MANUAL - UG2000DM SERIES SPRAY GUN CLEANERS
INTRODUCTION
Uni-ram holds many patents on designs used in its innovative products. Every machine is tested
for compliance with Quality Assurance standards. Follow the directions in this manual under Setup,
Operation and Maintenance in order to operate this machine safely and effectively. Not following these
instruction can lead to malfunction or damage to the machine. Ensure that the manual is readily avail-
able for the operator at all times. If you have any questions about the operation of this machine, call your
Distributor or Uni-Ram Service Engineer at 1-800-417- 9133.
COMMON FEATURES
•
Automatic Wash
•
Clean 2 Spray Guns and 2 Pots at the same time.
•
14 Cleaning Jets with swirl action.
•
Flow-through Brush operated by a foot pedal.
•
Shipping Size and Weight: 28" W x 17" D x 42" H, 91 LBS 41 KG.
CAUTIONS AND WARNINGS
•
Always disconnect this machine from power sources before performing maintenance.
•
Do not smoke or use near open flames, sparks or heat.
•
Make sure all ground wires are connected and that unit itself is grounded properly.
SAFETY EQUIPMENT
•
Wear safety eyeware, respiratory protection and protective clothing.
•
Wear deluxe extended length neoprene gloves; SAS PN 6588 or Thicksters PN 6602-20 through
6605-20.
SETUP
DELIVERY INSPECTION
•
Inspect the shipping carton for any sign of transport damage. Carefully remove the unit from the ship-
ping carton and check the unit for damage. Report any transport damage immediately to the carrier
and to Uni-ram Corporation. Initiate a freight claim with the carrier. The manufacturer is not respon-
sible for the freight damage.
Bag of accessories contains the following:
•
Push on adapter for disposable cup (110-430PPS).
•
Tapered plug (kit-plug) (150-231)
•
Trigger lock spring and plug package (140-2340) (2 in a package).
2
REVISED 2018-12
Advertisement
Table of Contents
