Table of Contents
Advertisement
12 | Analog and Frequency Inputs
66 / 144
Physical limits
of channel
7.
Click 'Finish' when done.
8.
Enter channel name and description.
9.
Click 'OK' when done.
The channel is inserted into the C 80 Project Tree.
Channel is linked
to ANA06
Available measurements for channel:
Measurement label
raw_name
raw_name_fi
name
name_fi
Online definition of the curve is covered in chapter 'Online calibration of measurement
channels [} 80]'.
Note
Working with automatically created measurement sheets is explained in chapter 'Setting
up an online measurement [} 75]'.
Manual_C_80
Characteristic
Adjustment
curve for sensor
is enabled
Input pull-up resistor
is deactivated
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Enter physical limits
of the sensor
Choose data type
of the measurement
variable
Enable additional
online calibration
Enter name to auto-
matically create a
new measurement
sheet
Bosch Motorsport
Advertisement
Table of Contents
